Target: to teach how to make a stucco painting from salt dough according to the plan, to arrange the work.
Application: The material is designed for grade 4 children, making birthday gifts, room interior decoration.
Equipment: plank, watercolors and gouache paints, brush, salted dough, PVA glue, colorless varnish, knife, stacks, gold stained glass contour.
If you love sculpting, then you will be interested in this master class. In it, I propose a technique for making a stucco painting from a recently popular material - salt dough. It is very easy to make it. we knead as usual dough and work wonders! Gifts and souvenirs made with your own hands have always been highly valued in the world, because they keep a piece of your hands, they are original and unique.
Such salty dough was used to make funny figures, amulets for houses. It was believed that any such craft that is in the house is a symbol of wealth, prosperity and prosperity in the family.
Mukosol is an old Arkhangelsk craft, which is at least four hundred years old. Pomor's wives gave figurines made of salt dough to their husbands who went fishing. These funny toys warmed the souls of the sailors and saved them from hunger more than once when they ran out of food.
1. Transfer the drawing you like to the board.
2. Prepare the salted dough.
Salty dough recipe: 2 cups sifted flour, 1 cup fine salt (not iodized), 1 incomplete glass of water, 1 tablespoon vegetable oil. Mix all the components, put in a plastic bag and leave in the refrigerator for 1 hour. After that, you can sculpt from the dough.
Useful advice... If you have dough left after modeling, you can save it by putting it in a plastic bag or in a closed plastic container in the refrigerator. If after that the dough becomes damp and moist, knead it thoroughly, add a little flour and knead again.
3. We will create a stucco painting. We will have voluminous nose, ears, eyes, tail, paws, cat cheeks and a basket of roses. We start with the bangs of the cat. We take the dough, knead it in our hands and sculpt a cat's bangs from it in the desired shape. In order for the dough to stick well to the board, moisten the place under the dough with PVA glue. After drying, the glue becomes invisible. We use a knife to make the dough rough.
4. In the same way we sculpt all the details of the cat.
5. We begin to sculpt roses. You can make them flat by twisting the flagellum in a spiral.
We will get them like this. You can flatten the dough sausage, roll it up like a rose.
You will get a voluminous flower.
6. Form a flower basket from the strips of dough. Use a knife to make strips to shape the basket weaving. Let's mold the petals to the flowers.
7. Craft dries in room conditions within 2 - 3 days.
8. Let's start coloring. We paint the craft with watercolors and gouache paints. We use gold stained glass to decorate flowers.
9. We cover the craft with varnish. Varnish not only gives shine and completeness to the product, it protects it from moisture and crumbling. Transparent varnish is used for varnishing products. It is imperative to varnish painted products - under a protective layer of varnish, the paint will not sprinkle, crumble, stain your hands and fade.
Finally, it has become warmer, and I want blooming flowers, an alluring aroma in the air, a warm sun and a good mood. For now, I suggest you make a good mood at home. Today I have prepared for you a master class on creating the Queen of Flowers, namely a rose. Let's make picture of salted dough "Roses"size 30 * 40cm with three beautiful large roses.
Now I will show you how we will make the leaves. We take the dough, roll the ball, then a drop and press this drop on the surface with our fingers.
Now with the stack we will make a strip in the middle of the stack.
We will also make a strip and get a leaf.
Now we put our leaf on the palm and roll the edges with a stack, making them more delicate and thin.
Now that the procedure for obtaining a leaf is clear, let's start attaching them to the composition.
For the pains of the strength of the volumetric petals, add small pieces of dough in the right places, on which we will then glue the leaves.
This is how you can see how I spread the leaves on a piece of dough, bending them and making them voluminous with the help of pieces of foil, which I put under the bottom.
There are no many leaves, I thought, and I glue them all with water.
Now let's move on to the second heart-shaped sticks.
Here's the distance between our craft items.
It is approximate, at the moment we need it we can move and correct the sculpting. Now let's move on to sculpting the roses themselves. We take a piece of mass and a medium-sized droplet from it.
Now we make a ball, which we knead into a circle with our fingers, do not forget to thin the edges of the petal of the future.
Now we take our droplet and wind a circle on it.
Glue the second petal of the same on the back side.
Now swing the petal in the palm of your hand, thinning only the upper part.
For faster sculpting, roses can also be used in a row of 3-4 overlapping petals.
Here we put a drop with two petals on the edge and twist a row of petals.
you can also grab the rest of the petals, which will be initially collected on the surface.
We roll the larger petals and overlap them on the work surface, immediately make bends and put foil in the right places.
Also, while the finished petals are a little weathered, you can build up our middle with petals.
We will make this rosette a little turned to the side, so we only put 3 petals on the surface and build on one side, on which the rose will be turned, glue everything together.
This is how our rosette lay easily and wavyly. Now add one petal at a time from under the bottom, holding it with your fingers and placing the foil.
Now let's move on to the second rose. We also make a bud and build up the petals. This time I made the middle more prominent.
We put pieces of foil and lay out the petals, capturing the leaves a little on the surface.
Here is about the first row of petals sent out.
Now we lay out the second row of petals a little in a checkerboard pattern, helping with foil.
We start the third row standing a little.
Here you can see more closely that the petals are almost standing.
Now we try on our middle, if there are no holes, you can insert it, if there is still a void somewhere, you need to attach the petals.
Here we have such a rose.
I left my roses overnight and the dough dried out a little, removed the foil.
Now let's make the leaves. Leaflets are also best done in the palm of your hand. We roll a drop and roll it with a stack or fingers in the form of a leaf.
Thin the edges with a round tip stack or any small ball or bead.
Now with a stack we draw lines from the end to the middle of the sheet and we get such an interesting piece of paper.
Now we glue the leaves near the rose.
Now let's move on to the third rose. We take the petals and lay out a circle with them much larger than on the second rose.
Here is the first row ready.
Here are half of our picture.
And the second row of petals is ready.
We fasten the third row by placing foil.
Now it goes more to the middle, we glue the smaller petals.
Here you can see that our petals are already standing.
We will insert a piece of foil into this flower in the middle.
And roll up a big drop.
Let's attach the petals.
Insert a small amount of dough into the middle of our future rose and level it.
Now let's try our middle.
You can see that our middle got up and filled everything well.
This is how we did the flower sculpting robot. Now we wait for the base to dry.
While the flowers are drying, you can attach the leaves.
I also made the petals separately and left them to dry separately. Why did I do it, but for the fact that if during drying and assembling the composition a hole turns out or something is missing, it would be possible to attach a piece of paper and everything would be in harmony.
Now we need to make dew on the flowers and leaves. You don't have to do it, I did it for an experiment. We just roll a small ball, which we press a little to the table with our finger and carefully attach it to an already dried leaf or petal with the help of water.
Now that our flowers are dry, you can start painting. We paint with gouache. Mix the red with white and paint the roses.
We try to capture all the areas both on the leaf and under it.
Here is our one rose painted.
Now, with a semi-dry brush, apply white paint to the tips of the rose and blend it.
We make a smooth color transition.
All the flowers have been colored.
The leaves interfered with my coloring, I just pushed them aside, since they were not glued to our flowers, only lay next to them. Now we paint the leaves with green paint.
In the middle of the leaf we make a white strip with a dry brush.
And blend it. On the edges we shade with black or greener paint.
We spread our painted leaves to the base.
Here is our composition.
Modeling figures from salt dough or dough plastic is a very exciting activity that does not require special skills and special financial investments. Salt, water and flour are the main ingredients for this type of handicraft. The dough turns out to be soft and pliable, allowing even beginners to make wonderful crafts.
First, you can sculpt the simplest figures, then try to make more complicated products: small souvenirs, dolls, and even volumetric paintings. With a little experience and using creative imagination, you can make the most real works of art! In addition, by doing various crafts with your children, you will not only teach them to do creative work and develop fine motor skills, but also enjoy precious moments of communication.
Our master class and a few interesting ideas will help you complete simple crafts, and the necessary tips will make this creative process as fruitful and exciting as possible.
There are many recipes for modeling salt dough. Depending on the scale of the crafts, salt, flour and water are mixed in different proportions, and, among other things, additional ingredients are added to the dough: glycerin, glue, vegetable oil, starch and even hand cream. For beginners, the dough is recommended to be made according to the classic recipe. For this, flour and salt are mixed in equal proportions with the gradual addition of cold water. For example, 200 g of salt and 200 g of flour will require 125 g of water.
A tip for beginners!
In addition to flour, water and salt for the master class, you will need the following devices:
Depending on what kind of figurines you will be making, you may need cookie cutters, beads, buttons, sheets of different shapes to create prints.
Mukosolki can be made using a small knife, cutting out all kinds of elements. For example, you can make a pendant house for children on a Christmas tree or a funny cat with rope legs. A salty pancake can make a pretty owl if you wrap its three edges and cut out the eyes with a nose.
The materials and devices required to create such a funny lamb will be needed the same as in the previous master class.
As a rule, salty dough is used for paintings according to the following recipe: one glass of salt and flour, 1 tbsp. water. For beginners, it is best to use a small amount of salty figurines in a painting, decorating the rest of the space with decorative materials. Salted details are best done on foil, so that their reverse surface is perfectly flat and easily glued to the picture field.
Materials (edit): plank, watercolors and gouache paints, brush, salted dough, PVA glue, colorless varnish, knife, stacks, gold stained glass contour.
If you love sculpting, then you will be interested in this master class. In it, I propose a technique for making a stucco painting from a recently popular material - salt dough. It is very easy to make it. we knead as usual dough and work wonders! Gifts and souvenirs made with your own hands have always been highly valued in the world, because they keep a piece of your hands, they are original and unique.
Such salty dough was used to make funny figures, amulets for houses. It was believed that any such craft that is in the house is a symbol of wealth, prosperity and prosperity in the family.
Mukosol is an old Arkhangelsk craft, which is at least four hundred years old. Pomor's wives gave figurines made of salt dough to their husbands who went fishing. These funny toys warmed the souls of the sailors and saved them from hunger more than once when they ran out of food.
1. Transfer the drawing you like to the board.
2. Prepare the salted dough.
Salty dough recipe: 2 cups sifted flour, 1 cup fine salt (not iodized), 1 incomplete glass of water, 1 tablespoon vegetable oil. Mix all the components, put in a plastic bag and leave in the refrigerator for 1 hour. After that, you can sculpt from the dough.
Useful advice... If you have dough left after modeling, you can save it by putting it in a plastic bag or in a closed plastic container in the refrigerator. If after that the dough becomes damp and moist, knead it thoroughly, add a little flour and knead again.
3. We will create a stucco painting. We will have voluminous nose, ears, eyes, tail, paws, cat cheeks and a basket of roses. We start with the bangs of the cat. We take the dough, knead it in our hands and sculpt a cat's bangs from it in the desired shape. In order for the dough to stick well to the board, moisten the place under the dough with PVA glue. After drying, the glue becomes invisible. We use a knife to make the dough rough.
4. In the same way we sculpt all the details of the cat.
5. We begin to sculpt roses. You can make them flat by twisting the flagellum in a spiral.
We will get them like this. You can flatten the dough sausage, roll it up like a rose.
You will get a voluminous flower.
6. Form a flower basket from the strips of dough. Use a knife to make strips to shape the basket weaving. Let's mold the petals to the flowers.
7. Craft dries in room conditions within 2 - 3 days.
8. Let's start coloring. We paint the craft with watercolors and gouache paints. We use gold stained glass to decorate flowers.
9. We cover the craft with varnish. Varnish not only gives shine and completeness to the product, it protects it from moisture and crumbling. Transparent varnish is used for varnishing products. It is imperative to varnish painted products - under a protective layer of varnish, the paint will not sprinkle, crumble, stain your hands and fade.
Can be compared to the pattern on the postcard.
I give you mukosol to have bread and salt.
10. Possible options for work:
11. Works of students.
21.12.2017
Finally, it has become warmer, and I want blooming flowers, an alluring aroma in the air, a warm sun and a good mood. For now, I suggest you make a good mood at home. Today I have prepared for you a master class on creating the Queen of Flowers, namely a rose. Let's make picture of salted dough "Roses"size 30 * 40cm with three beautiful large roses.
Now I will show you how we will make the leaves. We take the dough, roll the ball, then a drop and press this drop on the surface with our fingers.
Now with the stack we will make a strip in the middle of the stack.
We will also make a strip and get a leaf.
Now we put our leaf on the palm and roll the edges with a stack, making them more delicate and thin.
Now that the procedure for obtaining a leaf is clear, let's start attaching them to the composition.
For the pains of the strength of the volumetric petals, add small pieces of dough in the right places, on which we will then glue the leaves.
This is how you can see how I spread the leaves on a piece of dough, bending them and making them voluminous with the help of pieces of foil, which I put under the bottom.
There are no many leaves, I thought, and I glue them all with water.
Now let's move on to the second heart-shaped sticks.
Here's the distance between our craft items.
It is approximate, at the moment we need it we can move and correct the sculpting. Now let's move on to sculpting the roses themselves. We take a piece of mass and a medium-sized droplet from it.
Now we make a ball, which we knead into a circle with our fingers, do not forget to thin the edges of the petal of the future.
Now we take our droplet and wind a circle on it.
Glue the second petal of the same on the back side.
Now swing the petal in the palm of your hand, thinning only the upper part.
For faster sculpting, roses can also be used in a row of 3-4 overlapping petals.
Here we put a drop with two petals on the edge and twist a row of petals.
you can also grab the rest of the petals, which will be initially collected on the surface.
We roll the larger petals and overlap them on the work surface, immediately make bends and put foil in the right places.
Also, while the finished petals are a little weathered, you can build up our middle with petals.
We will make this rosette a little turned to the side, so we only put 3 petals on the surface and build on one side, on which the rose will be turned, glue everything together.
This is how our rosette lay easily and wavyly. Now add one petal at a time from under the bottom, holding it with your fingers and placing the foil.
Now let's move on to the second rose. We also make a bud and build up the petals. This time I made the middle more prominent.
We put pieces of foil and lay out the petals, capturing the leaves a little on the surface.
Here is about the first row of petals sent out.
Now we lay out the second row of petals a little in a checkerboard pattern, helping with foil.
We start the third row standing a little.
Here you can see more closely that the petals are almost standing.
Now we try on our middle, if there are no holes, you can insert it, if there is still a void somewhere, you need to attach the petals.
Here we have such a rose.
I left my roses overnight and the dough dried out a little, removed the foil.
Now let's make the leaves. Leaflets are also best done in the palm of your hand. We roll a drop and roll it with a stack or fingers in the form of a leaf.
Thin the edges with a round tip stack or any small ball or bead.
Now with a stack we draw lines from the end to the middle of the sheet and we get such an interesting piece of paper.
Now we glue the leaves near the rose.
Now let's move on to the third rose. We take the petals and lay out a circle with them much larger than on the second rose.
Here is the first row ready.
Here are half of our picture.
And the second row of petals is ready.
We fasten the third row by placing foil.
Now it goes more to the middle, we glue the smaller petals.
Here you can see that our petals are already standing.
We will insert a piece of foil into this flower in the middle.
And roll up a big drop.
Let's attach the petals.
Insert a small amount of dough into the middle of our future rose and level it.
Now let's try our middle.
You can see that our middle got up and filled everything well.
This is how we did the flower sculpting robot. Now we wait for the base to dry.
While the flowers are drying, you can attach the leaves.
I also made the petals separately and left them to dry separately. Why did I do it, but for the fact that if during drying and assembling the composition a hole turns out or something is missing, it would be possible to attach a piece of paper and everything would be in harmony.
Now we need to make dew on the flowers and leaves. You don't have to do it, I did it for an experiment. We just roll a small ball, which we press a little to the table with our finger and carefully attach it to an already dried leaf or petal with the help of water.
Now that our flowers are dry, you can start painting. We paint with gouache. Mix the red with white and paint the roses.
We try to capture all the areas both on the leaf and under it.
Here is our one rose painted.
Now, with a semi-dry brush, apply white paint to the tips of the rose and blend it.
We make a smooth color transition.
All the flowers have been colored.
The leaves interfered with my coloring, I just pushed them aside, since they were not glued to our flowers, only lay next to them. Now we paint the leaves with green paint.
In the middle of the leaf we make a white strip with a dry brush.
And blend it. On the edges we shade with black or greener paint.
We spread our painted leaves to the base.
Here is our composition.
For the period of the formation of the picture, I changed it 2 times (I mean the leaves in places).
now paint the dew drops the same color and give them a highlight with white paint.
Let's not forget about the droplets on the leaves.
Now cover the dew drops with nail polish.
Now take a sheet of wallpaper, preferably loose, and buy a frame with a back. We wrap the base of the picture made of salted dough with wallpaper.
And press with a frame. Gently glue the parts onto the finished base using PVA glue.
If you liked our site, express your "thanks" by clicking on the buttons below:
Modeling figures from salt dough or dough plastic is a very exciting activity that does not require special skills and special financial investments. Salt, water and flour are the main ingredients for this type of handicraft. The dough turns out to be soft and pliable, allowing even beginners to make wonderful crafts.
First, you can sculpt the simplest figures, then try to make more complicated products: small souvenirs, dolls, and even volumetric paintings. With a little experience and using creative imagination, you can make the most real works of art! In addition, by doing various crafts with your children, you will not only teach them to do creative work and develop fine motor skills, but also enjoy precious moments of communication.
Our master class and several will help you complete simple crafts, and the necessary tips will make this creative process as fruitful and exciting as possible.
There are many recipes for modeling salt dough. Depending on the scale of the crafts, salt, flour and water are mixed in different proportions, and, among other things, additional ingredients are added to the dough: glycerin, glue, vegetable oil, starch and even hand cream. For beginners, the dough is recommended to be made according to the classic recipe. For this, flour and salt are mixed in equal proportions with the gradual addition of cold water. For example, 200 g of salt and 200 g of flour will require 125 g of water.
A tip for beginners!
In addition to flour, water and salt for the master class, you will need the following devices:
Depending on what kind of figurines you will be making, you may need cookie cutters, beads, buttons, sheets of different shapes to create prints.
A salt dough painting can be impressive and interesting with a little effort. Its creation is a very exciting activity, it will bring many positive impressions and will not let you get bored, and the result will delight you even more. The salty dough recipe is simple and straightforward, everyone can handle it. And below you will find a complete step-by-step guide on how to create your first painting from salt dough with your own hands.
Due to its bulkiness, flower arrangements made of salt dough look very beautiful. Chamomiles, roses, tulips, poppies, gladioli, sunflowers - pictures with their images will remind you of spring days and summer sun even during winter frosts and delight you with their brightness and freshness. Making them is much easier than it sounds, and our beginner's instructions for creating a picture of salt dough with flowers will definitely help you with this.
Salted dough can be dyed with dyes during the preparation process or painted on the finished product, it depends on your own wishes. In our master classes, we will use both options.
We need the following ingredients:
Mix water with flour, add salt to the mixture, add butter if desired, put the resulting dough in the refrigerator for a couple of hours. The oil will add elasticity to the dough.
If you want to immediately color the dough, then you need to divide it into parts and mix each of them with gouache or food coloring of the desired color. Please note that the salty dough turns slightly pale as it dries. You can mix colors and add different amounts to the dough to achieve different shades. It's very exciting, try it!
Sunflowers are cheerful summer flowers, a symbol of the sun and life. They can become a bright accent in your interior, create a special atmosphere of warmth and comfort. To sculpt a picture with sunflowers, you will need:
If desired, the work can be diversified with other wildflowers, add details. Look at the photo, what pictures with sunflowers you can do yourself.
Rose is the queen of flowers, so in our master class we cannot ignore her. Making roses from salted dough takes a little more perseverance and skill, but the result is fantastic. You will need colored dough, glue, stacks, and a dough stick to hold the bud on.
Having mastered the technique, you can create stunning pictures from salt dough. Not only flowers, but also many other images look spectacular in this volumetric technique. For inspiration, we suggest you look at photos of some of the works.
In order not to miss anything and better understand the process, you can watch our video master class. It is suitable for beginners, but more experienced craftsmen will find useful tips from them.
Materials (edit): plank, watercolors and gouache paints, brush, salted dough, PVA glue, colorless varnish, knife, stacks, gold stained glass contour.
Mukosol is an old Arkhangelsk craft, which is at least four hundred years old. Pomor's wives gave figurines made of salt dough to their husbands who went fishing. These funny toys warmed the souls of the sailors and saved them from hunger more than once when they ran out of food.
2. Prepare the salted dough.
Useful advice
You will get a voluminous flower.
Can be compared to the pattern on the postcard.
I give you mukosol to have bread and salt.
10. Possible options for work:
11. Works of students.
Target: to teach how to make a stucco painting from salt dough according to the plan, to arrange the work.
Application: The material is designed for grade 4 children, making birthday gifts, room interior decoration.
Equipment: plank, watercolors and gouache paints, brush, salted dough, PVA glue, colorless varnish, knife, stacks, gold stained glass contour.
If you love sculpting, then you will be interested in this master class. In it, I propose a technique for making a stucco painting from a recently popular material - salt dough. It is very easy to make it. we knead as usual dough and work wonders! Gifts and souvenirs made with your own hands have always been highly valued in the world, because they keep a piece of your hands, they are original and unique.
Such salty dough was used to make funny figures, amulets for houses. It was believed that any such craft that is in the house is a symbol of wealth, prosperity and prosperity in the family.
Mukosol is an old Arkhangelsk craft, which is at least four hundred years old. Pomor's wives gave figurines made of salt dough to their husbands who went fishing. These funny toys warmed the souls of the sailors and saved them from hunger more than once when they ran out of food.
1. Transfer the drawing you like to the board.
2. Prepare the salted dough.
Salty dough recipe: 2 cups sifted flour, 1 cup fine salt (not iodized), 1 incomplete glass of water, 1 tablespoon vegetable oil. Mix all the components, put in a plastic bag and leave in the refrigerator for 1 hour. After that, you can sculpt from the dough.
Useful advice... If you have dough left after modeling, you can save it by putting it in a plastic bag or in a closed plastic container in the refrigerator. If after that the dough becomes damp and moist, knead it thoroughly, add a little flour and knead again.
3. We will create a stucco painting. We will have voluminous nose, ears, eyes, tail, paws, cat cheeks and a basket of roses. We start with the bangs of the cat. We take the dough, knead it in our hands and sculpt a cat's bangs from it in the desired shape. In order for the dough to stick well to the board, moisten the place under the dough with PVA glue. After drying, the glue becomes invisible. We use a knife to make the dough rough.
4. In the same way we sculpt all the details of the cat.
5. We begin to sculpt roses. You can make them flat by twisting the flagellum in a spiral.
We will get them like this. You can flatten the dough sausage, roll it up like a rose.
You will get a voluminous flower.
6. Form a flower basket from the strips of dough. Use a knife to make strips to shape the basket weaving. Let's mold the petals to the flowers.
7. Craft dries in room conditions within 2 - 3 days.
8. Let's start coloring. We paint the craft with watercolors and gouache paints. We use gold stained glass to decorate flowers.
9. We cover the craft with varnish. Varnish not only gives shine and completeness to the product, it protects it from moisture and crumbling. Transparent varnish is used for varnishing products. It is imperative to varnish painted products - under a protective layer of varnish, the paint will not sprinkle, crumble, stain your hands and fade.
How does osteochondrosis of the legs manifest and how is it treated?