Star News
Do-it-yourself casts of the feet of the babies' palms. Master class on how to make prints of your baby's pens and legs as a souvenir. Ideas - baby prints
Small children grow up quickly, and I really want to capture their tiny fingers and legs in my memory. Casts of handles and legs made by parents can become quite tangible thing. The manufacturing process is very simple, materials are available, and the result will delight you for many years.
You will need:
- flour;
- salt;
- water;
- gypsum or alabaster;
- spray paint;
- picture frame;
- liquid Nails;
- baby photo, decoration.
The considered option allows you to make casts of handles and legs using scrap materials. For volumetric impressions, ready-to-use gel-filled kits are available.
and what to give to mom and newborn ?. Breast-feeding. A child from birth to one year. I do not want a banal rattle, but something very memorable, the baby is very, very long-awaited. set for the impression of the handle - legs?
I have always had a peculiar attitude towards all kinds of casts of the arms and legs of babies. But today I came across a thing that completely changed my mind. I'm crying.
DIY casts of handles and legs. On March 8, we decided to give our beloved grandmothers a gift in the form of casts of the pens and legs of our 4-month-old daughter. To do this, for 1 glass of flour and 1 glass of salt, take half a glass of brewed starch: 1 tbsp ...
Foot print. Parenting experience. A child from birth to one year. Care and upbringing of a child up to one year old: nutrition, illness, development. They also did it at 6 months, it did not work out the first time, to press in the handle - the leg had to be quite strong.
I would like to ask experienced mothers who have already made such casts about the casts of handles and legs. Which option is better to buy, 3D or simple? See examples below. just can't imagine how to do 3D. After all, in theory, if you take your hand back, the mass should follow it and ...
Section: Gifts (For happy parents, the opportunity to preserve the first traces of your baby's childhood). casts of handles and legs.
Did it work well? Did you get hand or foot prints? DIY gift for a girl. A present for the second child. graduation in kindergarten. New Year's gifts.
DIY casts of handles and legs. Foot print. Parenting experience. A child from birth to one year. Care and upbringing of a child up to one year old: nutrition, illness, development. If you decide to make a cast of a child's hand or foot ... Smooth embroidery, tell me.
Hand and foot casts. - get-togethers. A child from birth to one year. Care and upbringing of a child up to one year old: nutrition, illness, development. homemade the first time it did not work: (everything was done according to the instructions, but it turned out that it was necessary to have a leg (put a handle) earlier, no hands ...
DIY casts of handles and legs. The result is not so pleasing to the eyes - the blinds turn out to be remotely similar to real palms. Rough, no small pattern on the hand is visible. Buy ready-made sets for making prints of children's hands and feet with modern materials.
cast of the handle and leg. - get-togethers. A child from birth to one year. Care and upbringing of a child up to one year old: nutrition, illness, development. Cast: 2 cups flour, 1 cup salt, 3/4 cup water, knead the dough well, make a layer 2 cm thick, wash the baby's hands and ...
Hand prints. How can you make casts of the baby's arms and legs by yourself ??? It seems there is some kind of recipe from dough with salt, but what proportions ??? And if it's not difficult, give me an idea of how to arrange all this?
Casts are prints. ... I find it difficult to choose a section. Child from 1 to 3. Raising a child from one to three years: hardening and development, nutrition and illness If someone made such a gift: casts of a hand and a leg in a frame, tell me where and for how much? And then we will soon have DR ...
casts. ... I find it difficult to choose a section. Child from 1 to 3. Raising a child from one to three years: hardening and development, nutrition and illness, daily regimen and Section: ... I find it difficult to choose a section (Tell me, p-that, did anyone make casts of handles / legs on their own child).
DIY casts of handles and legs. We have this, only the color of the frame is different, they did it in 2 months, my husband helped, the first time it didn't work out from the third only, I rolled it out, then put it on my palm, made a date with a toothpick, circled the circle with a glass and left it to dry ...
Conference "Child from birth to one year" "Child from birth to one year". Section: Achievements (I want to make prints of pens and legs. And they gave us a special clay. We already have a otchepyatka leg. And in this set there is a frame for this cast, next to it ...
DIY prints of children's hands and feet. METHOD 1 We make an impression of the child's hand or foot. In the end, we did not bother with plaster, but made an imprint with paint) also in the frame.
As soon as your baby is born - be sure to make prints of baby pens and legs with your own hands! Time flies very quickly and the imprint of the baby's pen will never be repeated! Try to make a panel with prints in the very first days of a baby's life, because children sleep much harder at first, and a little more free time.
Below is mine master class with a photo how to make prints of the baby's arms and legs voluminous, and now I'll tell you about all the other methods known to me.
It is best to make prints of the baby's pens in a dream, and then wipe your hands with wet wipes. It is easiest to make prints of the baby's pens and legs with paint. The "most useful" thing, that is, completely harmless to the baby's delicate skin, is to make prints on the salt dough.
How to make prints of baby's legs and arms using salt dough
While this is the easiest method, it is also the most fragile. Keep in mind - over time, you will have to throw out the dough, as it can deteriorate, for example, soften from moisture. A good coat of varnish will help the salt dough pen print to maintain its appearance, but it will definitely not live up to the grandchildren.
Salt dough recipe for prints:
Salted dough for prints is made in the most primitive way! Take the finest grinding salt and mix it with flour 1 to 1, for example, a glass of flour for a glass of salt. And add a little water, kneading the tough dough. If poured, add flour. Then you can take a plastic container, place a dough cake there, make an imprint, if necessary, cut a circle around it and put it in a dry place. There is no need to bake, as it is said in many master classes on casts of handles and legs made of salted dough! The dough will change its shape and the print will deform. After a few days, the print can be coated with acrylic paint and varnish on any surface (the varnish is sold in hardware stores).
How to make plaster prints with your own hands
I did these with my eldest daughter, but I didn't really like the result, because they are quite heavy and then there is nowhere to put them. To make plaster prints of the handles and legs of a child, buy plaster at a hardware store (20 rubles a pack), dilute according to the instructions on the package. Pour into a beautifully shaped container - a round cup, for example, previously covered with cling film. Touch your finger - after a few minutes, when the plaster begins to harden and becomes more dense, make a print with the child's hand and foot, smeared with sunflower oil or very fatty cream. Remove from the mold. Ideally, use silicone molds.
And now I am sharing my experience, How to make volumetric casts of baby's arms and legs at home!
It so happened that I made the prints of my children's children's pens from salt dough when my youngest son was born. Then she left it to harden on the windowsill and safely forgot about them for several months. When I remembered my desire to make voluminous baby pens, the size of the kids' pens was not at all the same! But I took out the dough pieces and ... found that they almost deteriorated - some became soft, some completely softened, some still somehow held out with their last strength (here it is - minus the salted dough!). It was necessary to urgently save the situation. And I remembered that for six months I had the cheapest self-hardening plastic, bought for training the sculpting of dolls' heads.
Here it is in the photo, the pack was a kilogram (365 re), prints for 10 are enough. I bought in Gostinka (St. Petersburg), in the department on the ground floor with brushes, paints, etc. Those who live in another city will be able to order self-hardening plastic on the Internet or buy in large cities in stores with goods for artists. In stores with goods for making dolls, the plastic will be better and four times more expensive. Also in the photo - in the same department I bought the cheapest acrylic paints on any surface (92 rubles for the whole set. It will be enough for 10 years if my daughter does not get there).
And now about how to make a volumetric impression of the baby's legs and arms from plastic.
First, make prints with salt dough and leave to cure. In general, you can varnish them, wash them after work and then give them as a keepsake to grandparents. I read on the Internet that I advise you to make the basis for the casts from the same plastic. But, firstly, it is not very soft, and secondly, it doesn’t smell very pleasant, so I didn’t want to touch it on the child’s skin.
I drained the oil, kneaded the plastic pancake and stamped it into the print. That is, I pressed it well there with my fingers, so that it took the form of a child's pen. So that it doesn't break later, I added pieces of plastic to the washed one. My surface is not very even, since this plastic also lingered in my not very well closed pack for more than nine months, so it was not very plastic and crumbled. Your print should repeat all the smallest folds of the baby's arms and legs.
I took out a print, after the oil it can be taken out easily.
Since my dough is already softened, I removed the crumbs with a cotton swab and butter. If you have a fresh print, and even varnished, you do not need to do this.
I cut it out with an ordinary knife, left it to dry on a flat surface for several days.
Even the smallest can be attracted to the coating of children's casts of handles and legs with paint, they will be happy to help!
Then I covered the plastic casts with two more layers of gold paint.
It is not necessary to varnish acrylic on any surface. All that remains is to make a beautiful panel! You can glue not only casts of handles and legs, but also photographs of children, some memorabilia, the first socks and a pacifier ...
Ideally, stick with a hot gun (I saw a small one in hardware stores, for example, in the Ob about 150 rubles). You can use the glue moment. For the background, take a very thick cardboard, but it is better to paint the thick base of the frame itself.
I do not yet know which panel I want, I made a rough sketch for you. But, of course, I would like to use the belongings of paper, frames, etc. - in general, there is still a lot of work, but the result is worth it! And if you want to make volumetric impressions of the child's hands and feet for memory, which will remain intact until your very old age, it is best to use a deep frame for volumetric panels, which has a distance of about 3 cm from the substrate to the glass.
Happy creativity!
There are even more master classes for children, with children and for your beloved - in the Creativity section!
And delicious master classes in the heading
To make a trace of the pens or legs of your baby, that is, the first trace of the crumbs, you must familiarize yourself with these instructions.
All materials that are intended for making impressions do not cause any harm and cannot cause.
For their manufacture, a small amount will be required, this will not disturb the child, because the technology by which the casts are made is innovative, and the composition from which the cast will be made is hypoallergenic.
Experts have specially developed kits so that parents can create their own children's casts.
Often, the parents of the children bought sets in stores, but the molding mass was not enough for a sufficient number of casts. But there are sets with which parents have several attempts before the real start. They train and start sculpting something really beautiful and neat. A high-quality cast is obtained. They can create it not only for themselves, but also as a gift to grandparents, godparents of their little ones, make casts of the children of close friends as a gift to them.
In addition to casts of the tiny limbs of your baby, you can create a cast of the hands of two lovers or newlyweds, a cast of your own hand.
Today, there is a large abundance of such things on sale, using which it is easy to create your own design for casts.
And on the Internet there are many samples for making casts.
If you want to put the resulting cast on a table or shelf, you need to fill in a plastic mold, for example, from under sweets, plaster, paint it with any paint, then glue the resulting cast of the leg or handle with good glue.
3d impression kits
Watch the video on how to create a snapshot correctly:
Now let's take a closer look at this video: mix the dry gel in the required proportion, beat with a mixer until a homogeneous mass is formed, convenient for use. After that, we lower the child's leg into the mass, take it out. Fill the mold with special plaster, after a while we take out the resulting sculpture.
Pretty easy, is it?
And now let's dwell in more detail on the proportions by which you need to mix water with the impression gel.
Take 100 grams of dry gel, also 400 milliliters of water. Well, to create an adult's hand, instead of a mayonnaise bucket, they take a two-liter bottle of plastic, cut off its throat. Take 250 grams of gel per liter of water.
For children whose age ranges from and older, it is necessary to calculate the proportions yourself. To do this, measure the required amount of water to completely immerse the child's arm or leg into the container.
In order to fill the mold, take a special plaster. To fill one cast, take ten five tablespoons of plaster and 0.05 liters of water.
In order to fill one cast of an adult's hand, you will need 20 tablespoons of gypsum and 0.18 liters of water.
2D Impression Kits
We create a convex cast of any part of the tiny limbs of your baby.
This technology assumes a plastic material for reusable use.
It is quite pliable and soft, capable of conveying every fold and line of the skin, perfectly keeps its shape.
But this material can be used almost indefinitely.
The main condition for storage is the mandatory presence of the material in the jar, the absence of contact with water, talc and oil.
This kit will help you make your own impressions of children's feet and handles every month. You will compare how the baby has grown.
And now a video tutorial for creating 2 d impressions:
When analyzing this video, we want to clarify again that the convex layer of the handle is made with the help of an impression ready-made mass manually, it is poured with a special plaster. Then everything dries up, the cast is pulled out, the mass is kneaded again. A new cast is created from it.
After this procedure, the impression mass is kneaded again, it is placed in a bag, which will not receive air, in order to take out the mass the next time and create a sculpture again.
The casts can be painted in any color you like. This can be done with watercolor paint, gouache, acrylic. Glue what you get to the photo frame. At the same time, use any decor that you like, some collages, booties, a tag, a pacifier, an ultrasound scan, a body, a vest, a hat. The main thing is to apply your imagination.
Do you want to make your baby's childhood memories even more amazing and vivid? Kits for making children's volumetric casts and prints will help parents with this. The small palms and heels of newborns are so appetizing and beautiful that you want to remember them in the smallest detail.
The arms and legs of the kids, we have already told you. Now let's talk about how you can design them in an original way.
Framed
Making casts of children's pens and legs in a frame is a classic of the genre, but this does not in the least detract from the charm of the made souvenirs. There are single, double and triple frames on sale, with or without a photo - it all depends on your wishes. You can make a frame with your own hands. In addition, you can add a frame with a cast or print in a variety of ways.
Use rhinestones, flowers, butterflies and other decorative delights.
Add a pacifier, socks, booties, or other memorabilia.
Color the prints in any shade - pink, blue, gold, silver, bronze.
Pendants
If, during the making of casts or prints of palms and heels, you make a small hole in them and thread a satin or lace ribbon through it, you can get an elegant pendant. This decor will look great in a child's room, living room or parent's office.
Figurines
To make a cute figurine, you just need to place the obtained 3D plaster casts on the platform and cover with paint. It is important to let them dry thoroughly before and after applying the decorative paint coat. You can apply paint in several layers, as well as use contrasting shades. Any ideas - the possibilities for creativity are unlimited. How to color? It all depends on your wishes - choose a golden or silver decor, antique or, on the contrary, fashionable and bright shades?
How to decorate a figurine? Add some chic - rhinestones, beads, flowers or any other decorative elements.
Heart shaped
Plaster prints or heart-shaped casts look very graceful. To add more chic to such souvenirs, you can use dyes for gold and silver. And of course, do not forget about the memorable signature with the name and age of the little child.
